TNEMEC SERIES 66 PRIMER

Refer to Tnemec Color Guide. Please read our disclaimer. Products Projects Resources Contact. Topcoats 46H , 66 , N69 , 73 , 84, , , , , , , , , , , , , U, , U, , Self-priming, , , , CMU: You haven’t added any color swatches to your packet. Part A and Part B.

Refer to the applicable topcoat product sheet for information on product specific maximum recoat times. Please download the product datasheet for complete details. Self-priming or , , , CMU: You haven’t added any color swatches to your packet. Refer to Tnemec Color Guide. Overhead Deck, Ductwork, Conduit, Dry:

Series 66 | Hi-Build Epoxoline

Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance. Topcoats 46H66N6973 tjemec, 84,,,, U,U, Refer to the applicable topcoat product sheet for information on product specific maximum recoat times.

Corn Mash Solution non-food contact. Allow stucco and plaster to cure and dry out for a minimum of 14 days before coating. Tnemec; Series Tneme-Glaze gloss. Please read our disclaimer. Epoxies chalk with extended exposure to sereis. Obtain and follow manufacturer’s instructions for examination and testing of substrates.

Anti-corrosive and anti-rust paints applied to interior ferrous metal substrates: Volatile Organic Compounds Unthinned: Division 5 – Shop Applied Coatings for Metals for shop priming of metal substrates with primers specified in this Section. Self-priming or Series 66, N69 Concrete: Coating manufacturer’s representative to verify that installation is in conformance to the manufacturer’s recommendations. Find and contact a coatings consultant near you.

These digital colors should not be used to finalize your ynemec selection. Self-priming or,CMU: Special serirs bases are recommended for immersion service. Number of coats and thickness requirements will vary with substrate, application method and exposure.

  ORANGE IS THE NEW BLACK SEASON 2 WILMARIE

Series 161 | Tneme-Fascure

Download Product Data Sheet. Epoxies chalk with extended exposure to sunlight and may yellow on aging. Volatile Organic Compounds Unthinned: Paints and coatings used on the interior of the building defined as inside of the weatherproofing system and applied on-site shall comply with the following criteria:.

Products Projects Resources Contact. All three tanks received various Mix and thin coatings, including multi-component materials, in accordance with manufacturer’s instructions. Refer to Tnemec Color Guide. They are only sedies that you may consider as alternatives in a general sense.

Expert custom color matching is also available by contacting your Tnemec Coatings Consultant. Please contact your local to finalize the most 666 system for your project. Verify suitability of moisture vapor emission rate of concrete floor surfaces. These digital colors should not be used to finalize your color selection.

The chemical resistance data listed on this website should only be used for general reference purposes.

Series 66HS | Hi-Build Epoxoline – Series 66HS by Tnemec Company, Inc.

Submit a written meeting report documenting the items discussed with copies to all parties attending within 3 days following the meeting. Overhead Deck, Ductwork, Conduit, Dry: Protect materials during handling and application to prevent damage or contamination. Coordinate project locations for applicable regional credits.

Calcium Hydroxide Also Known As: When used as a tank lining or in enclosed areas, provide adequate ventilation during application and cure. Established inTnemec Company is one of the largest privately held companies in the United States specializing in industrial coatings for new construction and maintenance.

  WATCH SUPERNATURAL MYTVLINE

These digital representations should not be used to finalize color selection s. Certify products meet or exceed specified requirements and are priker for intended application. Please contact your local to finalize the most appropriate system for your project. Please read our disclaimer.

SECTION 09 96 00 HIGH PERFORMANCE COATINGS (LEED v)

Lightly scuff-sand tape joints after priming to remove raised paper nap. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding. Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output. Finish Satin Primers Steel: Online color swatches are only digital reproductions of actual standards and will vary in appearance due to lrimer in monitor and video card output.

Coating system applied to sandblasted steel panels, cured for 7 days at 77 degrees F and immersed in tap water at 77 degrees F.